Chimney, skylight & roof-wall waterproofing
Tell us where your roof meets a chimney, dormer, or skylight and we route your request to an independent local roofing pro.
Across Orem's 1960s through 1990s subdivisions—and older brick homes in Provo, Springville, and Payson—roof-to-masonry and roof-to-wall intersections cause more repeat leaks than the open shingle field itself. Split-level homes feature lower garage or living-room roofs crashing directly into second-story siding, while mid-century ramblers frequently have wide brick fireplace chimneys emerging mid-slope where snow piles up all winter.
When heavy winter snowpack sits against a brick chimney or a low-slope dormer wall through January and February freeze-thaw cycles, any reliance on surface roof cement instead of true stepped metal flashing breaks down quickly. Caulk shrinks under Utah's dry summer heat, pulls away from brick mortar joints, and opens a hairline channel that funnels meltwater straight down the chimney chase into living-room ceilings.
Under the 2021 International Residential Code (Section R903.2 and Section R905.2.8), flashing must direct water away from every wall, chimney, skylight, and valley intersection without relying solely on sealants:
Independent roofing contractors rebuild failing sheet-metal intersections so water sheds mechanically over each lower layer rather than depending on temporary smears of roof mastic.
Stripping failing roof tar, installing individual step tins woven into adjacent shingles, cutting mortar reglets, and locking new metal counter-flashing tightly into the brick.
Building or rebuilding a pitched wooden saddle behind chimneys wider than 30 inches, wrapped in self-adhering ice shield and metal or shingle drainage planes.
Removing adjacent shingle courses around leaking skylights, wrapping the curb with polymer-modified bitumen membrane, and installing proper apron, step, and head flashing.
Correcting missing kickout diverters along stucco or siding walls on Orem split-levels and two-story bench homes so runoff lands cleanly inside the gutter.
| Flashing assembly | Utah 2021 IRC reference | Estimate basis |
|---|---|---|
| Brick chimney step flashing & reglet counter-flashing | IRC R903.2.1 & R905.2.8.3 corrosion-resistant metal flashing at wall/chimney junctions | Quoted on site after masonry & roof check |
| Chimney saddle / cricket installation (>30 in. wide) | IRC R1003.20 cricket required for chimneys wider than 30 in. parallel to ridge | Quoted on site by independent roofer |
| Roof-to-wall step & kickout diverter flashing | IRC R905.2.8.3 sidewall flashing and kickout protection behind siding/stucco | Quoted on site; siding access affects scope |
| Skylight curb membrane & factory flashing kit | IRC R903.2 & Utah R156-55a-301 (S280 covers non-electrical skylights) | Quoted on site by licensed contractor |
Brick mortar deterioration or cracked chimney crowns may also need masonry repair separately from roof metal flashing. Pricing is determined solely on site by the independent professional.
Independent roofing pros know Utah freeze-thaw cycles crack surface tar in a single winter; lasting fixes rely on woven step tins and reglet counter-flashing.
Utah County pros regularly repair hidden kickout leaks where roofs intersect stucco, brick, and siding on Orem and Highland homes.
An honest on-site inspection tells you whether the leak comes from roof flashing or from porous brick and cracked chimney caps.
Submit your request online once with zero homeowner referral fees.
Use our online estimate form to describe your chimney, skylight, or wall leak and connect with an independent local roofing pro.
Free — no obligations
Mention in our form whether the stain sits near a brick chimney, skylight, dormer, or split-level wall joint.
An independent Utah County roofer examines the flashing tins, mortar joints, adjacent shingles, and attic framing.
You receive a written scope detailing new flashing metal, underlayment, shingle weave-in, and any cricket or siding tie-in work.
Confirm active Utah DOPL licensing at secure.utah.gov/llv and decide whether to move forward with the contractor.